The on road price of GillettePJD 850 Generator in India is Not Available INR. The price may be different in your state kindly visit your near showroom.
GENERATOR SPECIFICATIONS | |
ENGINE | |
Manufacturer | John Deere |
Model and Type | 4045HF250, 4 Cycle, Liquid Cooled |
Aspiration | Turbocharged |
Cylinder Arrangement | 4 Cylinders, In-Line |
Displacement Cu. In. (Liters) | 276 (4.5) |
Bore & Stroke In. (Cm.) | 4.19 x 5 (10.6 x 12.7) |
Compression Ratio | 19.0:1 |
Main Bearings & Style | Aluminum/Tin, Babbit |
Cylinder Head | Cast Iron |
Pistons | 4, Aluminum Alloy |
Crankshaft | Forged Chrome Steel |
Exhaust Valve | Forged Heat Resistant Steel |
Governor | Electronic Isochronous |
Air Cleaner | Dry, Replaceable Cartridge |
Engine Speed | 1800 rpm |
FUEL SYSTEM | |
Type | Diesel Fuel Oil (ASTM No. 2-D) |
Secondary Fuel Regulator | Direct Injection |
Auto Fuel Lock-Off Solenoid | Stanadyne Rotary Type |
OIL SYSTEM | |
Type | Full Pressure |
Oil Pan Capacity qt. (L) | 13 (12.2) |
Oil Pan Cap. W/ filter qt. (L) | 14 (13.2) |
Oil Filter | 1, Replaceable Spin-On |
COOLING SYSTEM | |
Type of System | Pressurized, Open to atmosphere |
Coolant Pump | Pre-lubricated, self-sealing |
Cooling Fan Type (no. of blades) | Pusher (6) |
Fan Diameter inches (cm) | 18” (45.7) |
DIMENSIONS AND WEIGHTS | |
Length in (cm) | 88 (224) |
Width in (cm) | 29 (74) |
Height in (cm) | 55 (140) |
Features | |
World Renown Stamford Electric Generator having UL-1446 certification. | |
Full generator protection with Deep Sea 7420 controller, having UL-508 certification. | |
Automatic voltage regulator with over-excitation, under-frequency compensation, under-speed protection, and EMI filtering. Entire solid-state board is encapsulated for moisture protection. | |
Generator power ratings are based on temperature rise, measured by resistance method, as defined in MIL-STD 705C and IEEE STD 115, Method 6.4.4. | |
Power ratings will notexceed temperature rise limitation for class H insulation as per NEMA MG1-22.40. | |
Insulation resistance to ground, exceeds 1.5 meg-ohm. | |
Stator receives 2000 V. hi-potential test on main windings, and rotor windings receive a 1500 V. hi-potential test, as per MIL-STD 705B. | |
GENERATOR SPECIFICATIONS | |
Full amortisseur windings with UL-1446 certification. | |
Complete engine-generator torsional acceptance, confirmed during initial prototype testing. | |
Full load testing on all engine-generator sets, before shipping. | |
Self-ventilating and drip-proof & revolving field design | |
The Mileage of GillettePJD 850 is Not Available Now.
Not Available Right Now.
© Copyright 2024. All Rights