The on road price of GillettePJD 850 in Nagaland is Not Available INR. The price may be different in your state kindly visit your near showroom.
| GENERATOR SPECIFICATIONS | |
| ENGINE | |
| Manufacturer | John Deere |
| Model and Type | 4045HF250, 4 Cycle, Liquid Cooled |
| Aspiration | Turbocharged |
| Cylinder Arrangement | 4 Cylinders, In-Line |
| Displacement Cu. In. (Liters) | 276 (4.5) |
| Bore & Stroke In. (Cm.) | 4.19 x 5 (10.6 x 12.7) |
| Compression Ratio | 19.0:1 |
| Main Bearings & Style | Aluminum/Tin, Babbit |
| Cylinder Head | Cast Iron |
| Pistons | 4, Aluminum Alloy |
| Crankshaft | Forged Chrome Steel |
| Exhaust Valve | Forged Heat Resistant Steel |
| Governor | Electronic Isochronous |
| Air Cleaner | Dry, Replaceable Cartridge |
| Engine Speed | 1800 rpm |
| FUEL SYSTEM | |
| Type | Diesel Fuel Oil (ASTM No. 2-D) |
| Secondary Fuel Regulator | Direct Injection |
| Auto Fuel Lock-Off Solenoid | Stanadyne Rotary Type |
| OIL SYSTEM | |
| Type | Full Pressure |
| Oil Pan Capacity qt. (L) | 13 (12.2) |
| Oil Pan Cap. W/ filter qt. (L) | 14 (13.2) |
| Oil Filter | 1, Replaceable Spin-On |
| COOLING SYSTEM | |
| Type of System | Pressurized, Open to atmosphere |
| Coolant Pump | Pre-lubricated, self-sealing |
| Cooling Fan Type (no. of blades) | Pusher (6) |
| Fan Diameter inches (cm) | 18” (45.7) |
| DIMENSIONS AND WEIGHTS | |
| Length in (cm) | 88 (224) |
| Width in (cm) | 29 (74) |
| Height in (cm) | 55 (140) |
| Features | |
| World Renown Stamford Electric Generator having UL-1446 certification. | |
| Full generator protection with Deep Sea 7420 controller, having UL-508 certification. | |
| Automatic voltage regulator with over-excitation, under-frequency compensation, under-speed protection, and EMI filtering. Entire solid-state board is encapsulated for moisture protection. | |
| Generator power ratings are based on temperature rise, measured by resistance method, as defined in MIL-STD 705C and IEEE STD 115, Method 6.4.4. | |
| Power ratings will notexceed temperature rise limitation for class H insulation as per NEMA MG1-22.40. | |
| Insulation resistance to ground, exceeds 1.5 meg-ohm. | |
| Stator receives 2000 V. hi-potential test on main windings, and rotor windings receive a 1500 V. hi-potential test, as per MIL-STD 705B. | |
| GENERATOR SPECIFICATIONS | |
| Full amortisseur windings with UL-1446 certification. | |
| Complete engine-generator torsional acceptance, confirmed during initial prototype testing. | |
| Full load testing on all engine-generator sets, before shipping. | |
| Self-ventilating and drip-proof & revolving field design | |
The Mileage of GillettePJD 850 is .
Not Available Right Now.
© Copyright 2024. All Rights
