The on road price of GilletteSP 8005 in Assam is Not Available INR. The price may be different in your state kindly visit your near showroom.
GENERATOR SPECIFICATIONS | |
ENGINE | |
Manufacturer | General Motors |
Model and Type | Ind, Power Train, Vortec, 5.7LT, 4 cycle |
Aspiration | Turbocharged |
Cylinder Arrangement | 8 Cylinders, V-8 |
Displacement Cu. In. (Liters) | 350 (5.7) |
Bore & Stroke In. (Cm.) | 4.0 x 3.48 (10.1 x 8.8) |
Compression Ratio | 9.4:1 |
Main Bearings & Style | 5, M400 Copper Lead |
Cylinder Head | Cast Iron |
Pistons | Cast Aluminum |
Crankshaft | Nodular Iron |
Exhaust Valve | Inconel, A193 |
Governor | Electronic |
Air Cleaner | Dry, Replaceable Cartridge |
Engine Speed | 1800 rpm |
FUEL SYSTEM | |
Type | NAT. GAS (ONLY), Vapor Withdrawal |
Secondary Fuel Regulator | (1.74), 7” |
Auto Fuel Lock-Off Solenoid | NG (ONLY) Vapor System |
OIL SYSTEM | |
Type | Full Pressure |
Oil Pan Capacity qt. (L) | 6.0 (5.7) |
Oil Pan Cap. W/ filter qt. (L) | 6.5 (6.2) |
Oil Filter | 1, Replaceable Spin-On |
COOLING SYSTEM | |
Type of System | Pressurized, closed recovery |
Coolant Pump | Pre-lubricated, self-sealing |
Cooling Fan Type (no. of blades) | Pusher (12) |
Fan Diameter inches (cm) | 24.3" (61.6) |
DIMENSIONS AND WEIGHTS | |
Length in (cm) | 122 (310) |
Width in (cm) | 48 (122) |
Height in (cm) | 72.5 (183) |
Features | |
World Renown Stamford Electric Generator having UL-1446 certification. | |
Full generator protection with Deep Sea 7420 controller, having UL-508 certification. | |
Automatic voltage regulator with over-excitation, under-frequency compensation, under-speed protection, and EMI filtering. Entire solid-state board is encapsulated for moisture protection. | |
Generator power ratings are based on temperature rise, measured by resistance method, as defined in MIL-STD 705C and IEEE STD 115, Method 6.4.4. | |
Power ratings will notexceed temperature rise limitation for class H insulation as per NEMA MG1-22.40. | |
Insulation resistance to ground, exceeds 1.5 meg-ohm. | |
Stator receives 2000 V. hi-potential test on main windings, and rotor windings receive a 1500 V. hi-potential test, as per MIL-STD 705B. | |
GENERATOR SPECIFICATIONS | |
Full amortisseur windings with UL-1446 certification. | |
Complete engine-generator torsional acceptance, confirmed during initial prototype testing. | |
Full load testing on all engine-generator sets, before shipping. | |
Self-ventilating and drip-proof & revolving field design | |
The Mileage of GilletteSP 8005 is .
Not Available Right Now.
© Copyright 2024. All Rights