The on road price of GilletteEVTD 65EK in Manipur is Not Available INR. The price may be different in your state kindly visit your near showroom.
GENERATOR SPECIFICATIONS | |
Generator model | Evtd-65ek |
Maximum kilowatts | 6.5 |
Prime kilowatts | 6 |
Prime amps 120 /240 v. | 42/21 |
Brushless gen./reg | 5 % voltage regulation from name plate rating on all power-pro gen-sets |
Frequency reg | 5% frequency regulation from nameplate rating on all “ev” series sets |
“kleen-power”™ | Waveform distortion is limited to just 7 % on all “ev” gen-sets |
Engine brand and hp | Kohler |
At 3600 rpm. | (kd420) 10 hp |
Engine start | Electric only |
Eng. Cu. Centimeters | 420 |
Full pressure oil lub. | Yes |
Spin-on oil filter | Yes |
Low oil shutdown | Standard engine shutdown protection for all “ev” series sets |
Fuel use, gal./hour | 0.52 |
Fuel tank | Fuel tank is removed from stationary sets. |
Code g electric motor start power In hp rating | 1 1/2 hp |
Receptacle panel Components | Blank panel with no receptacles. A load terminal strip is included for power take-off, and (2) 25 amp push button circuit breakers. |
Length, inches | 27 |
Width, inches. | 20 |
Height, inches | 23 |
Net weight, lbs. | 205 |
Ship weight, lbs. | 222 |
Features | |
World Renown Stamford Electric Generator having UL-1446 certification. | |
Full generator protection with Deep Sea 7420 controller, having UL-508 certification. | |
Automatic voltage regulator with over-excitation, under-frequency compensation, under-speed protection, and EMI filtering. Entire solid-state board is encapsulated for moisture protection. | |
Generator power ratings are based on temperature rise, measured by resistance method, as defined in MIL-STD 705C and IEEE STD 115, Method 6.4.4. | |
Power ratings will notexceed temperature rise limitation for class H insulation as per NEMA MG1-22.40. | |
Insulation resistance to ground, exceeds 1.5 meg-ohm. | |
Stator receives 2000 V. hi-potential test on main windings, and rotor windings receive a 1500 V. hi-potential test, as per MIL-STD 705B. | |
Full amortisseur windings with UL-1446 certification. | |
Features of GilletteEVTD 65EKGenerator is very impressive and attractive to buy this generator. | |
Complete engine-generator torsional acceptance, confirmed during initial prototype testing. | |
Full load testing on all engine-generator sets, before shipping. | |
Self-ventilating and drip-proof & revolving field design | |
GENERATOR SPECIFICATIONS | |
The Mileage of GilletteEVTD 65EK is .
Not Available Right Now.
© Copyright 2024. All Rights